30-11-2020, 09:18 AM
(This post was last modified: 30-11-2020, 02:42 PM by krissprolls.)
(29-11-2020, 11:59 PM)Craig Wrote: The mac addresses are configuable. If using mutiple controllers change the mac address as well as the ip address so they are unique on your network.
Craig.
Thanks Craig,
I already do that, but the problem still exist on the show designer "configurator", the network card "name" is not open.
Is it necessary to change the multicast ip between the two controller ? I did with and without the same multicast ip but nothing.
I'm following my tests today.
The screenshot of the two cards.
I precise that ping command is ok for the two cards, and the tests pattern are ok for the both
When the working card ("1") is disconnect, the bad card ("2") still not working (but ping is OK) in show designer"network card XXX is not open"