Pixel lights.

[Pauls]

Is it possible to use the small dome pixel lights with this controller? And if so how as the controller is 7 to 24v and the lights are 5v.

[Jane]

Which controller are you looking at?

[Pauls]

(21-09-2020, 09:07 PM)Jane Wrote: Which controller are you looking at?

Sorry forgot to add the link. It's this one I have just ordered.

---

https://www.syncrolight.co.uk/ProductDet...-CARD.aspx

[Jane]

Yes the SD card controller does work with the small dome pixels.

[Pauls]

(21-09-2020, 10:36 PM)Jane Wrote: Yes the SD card controller does work with the small dome pixels.

So what voltage should I use?

[grigg]

(22-09-2020, 05:34 AM)Pauls Wrote:

(21-09-2020, 10:36 PM)Jane Wrote: Yes the SD card controller does work with the small dome pixels.

So what voltage should I use?

hi Paul if your refuring to these https://syncrolight.co.uk/ProductDetails...806-2.aspx 
then you should use a 5v power supply 

kind regards 
Jack

[Pauls]

(22-09-2020, 12:58 PM)grigg Wrote:

(22-09-2020, 05:34 AM)Pauls Wrote:

(21-09-2020, 10:36 PM)Jane Wrote: Yes the SD card controller does work with the small dome pixels.

So what voltage should I use?

hi Paul if your refuring to these https://syncrolight.co.uk/ProductDetails...806-2.aspx 
then you should use a 5v power supply 

kind regards 
Jack

Hi Jack

many thanks, the controller was delivered today and it says in the manual that you can use 5 to 40 v on it, i was questioning it as the item details on the website say 7v. will have a play with it later when i get the show selector that i also received today working correctly.

[Jane]

If the pixels are 5V then you should use a 5V power supply.  You need to use the correct voltage for the pixels or you will damage them.  The SD card controller works at 5v.