Posts: 40
Threads: 14
Joined: Jan 2020
Reputation:
0
Received my sl4000 controller today. First issue I found was no eithernet socket in my laptop so I have plugged it in to my router. Went to device manager and ethernet and wasn't showing. So did the force network. And found it and accessed the controller. Went to the ethernet tab to change the IP address and when I click save it comes up something about the sub net being different? Not sure how to sort it. I have managed to get it all working for tonight by changing the IP addresses in my shows configs but when the controller is powered off it loses that addresses. Anyone help? Also doesn't seem to save when I add a name for the controller.
Posts: 40
Threads: 14
Joined: Jan 2020
Reputation:
0
So have had a play tonight. Still can't get it to save an IP address. Go to device manager and have to force it. Then when I click save in the network tab it doesn't do anything. Any ideas anyone? Currently have to force it was very nightbwjn I turn it on and have to do it again the next time I turn it on.
Posts: 20
Threads: 6
Joined: Nov 2017
Reputation:
1
Hi,
What are the IP details of your PC? The controllers are programmed in a different range to most routers (192.168.0/1.xxx). I changed my pc to match the SL-4000 range when I set mine up. Then set the details to what I needed, save & reboot controller and then change PC back.